Product
Gabion fencing
We manufacture PREMIUM gabion fencing: welded construction, regular mesh and a complete set of installation hardware. Fast quotation, technical support and delivery across Poland and the EU.
- Vertical rods: Ø 4.8 mm
- Horizontal: C-channel profiles – vertical rods pass through the profiles
- Bolted cross connectors – wall spacing control
- Complete set of A2 stainless fasteners
Why it works
Premium gabion fencing – system, options and pricing
Gabion fencing combines a steel structure with natural stone infill. In practice, it means stability, privacy and excellent weather resistance. It suits homes, businesses and investment projects, especially where long-term durability and a repeatable visual effect matter. As a gabion manufacturer we design and produce gabion fencing using proven structural solutions and experience from thousands of installations.
Natural look
Stone creates a timeless aesthetic and pairs well with timber, steel and modern architecture.
Rigid geometry
Welded construction based on C-channel profiles helps maintain panel geometry after filling.
Minimal maintenance
No cyclic painting or impregnation — especially cost-effective on long fence lines.
Parameters
Technical specification
Key parameters for rigidity, installation and the final visual result.
Construction and dimensions
- Mesh: 5×20 cm (optional 5×10 cm)
- Vertical rods: Ø 4.8 mm
- Horizontal elements: C-channel profiles (vertical rods pass through the profiles)
- Connectors: bolted cross connectors (keep basket wall spacing)
- Panel width: up to 2500 mm
- Heights: 20–221 cm (every 20 cm)
Installation and finish
- Posts: steel (selected by height) + clamps
- Fasteners: complete A2 stainless set
- Post clamps: Standard (sufficient for typical uses) + MAX option
- Galvanising: EN ISO 1461, coating thickness approx. 70 µm
- Painting: optional powder coating (RAL)
- Delivery: Poland / EU
Note: for heights above approx. 220 cm (e.g. 240 or 260 cm), the fence can be made in two sections connected together — selection depends on the project and installation conditions.
Comparison
Welded gabion fencing vs welded-mesh baskets – key differences
At first glance, gabions may look similar, but in practice the difference is in structural rigidity and how well the fence keeps a straight line after filling. At Gablux we use welded construction based on horizontal C-profiles, because it gives better geometry control and overall stability of each panel.
Why the C-profile matters
The horizontal C-profile acts like a strong “frame”. It supports rigidity and helps keep the front plane straight, especially at greater heights and with heavy stone infill. That’s what makes the premium finish easier to achieve.
Why are bolted cross connectors crucial?
Bolted cross connectors keep the basket wall spacing and transfer loads. This is one of the most important elements for aesthetics: with correct connections, the front stays flat, and filling looks consistent without mesh “waviness”.
| Element | Welded (Gablux) | Weld-mesh baskets |
|---|---|---|
| Vertical material | Vertical rods (Ø 4.8 mm) guided through C-profiles – geometry control | Often more prone to “working” under the pressure of the infill |
| Horizontal structure | C-profile stiffener as the rigidity base | Horizontal layout without a strong “frame” may be less stable in practice |
| Connectors | Bolted cross connectors – basket wall spacing control | Less predictable connections under higher loads |
| Hardware | Complete installation hardware + A2 fasteners | Varies by manufacturer and configuration |
| Visual finish | Easier to keep flat faces, a straight top line and a clean infill | Often requires more effort to achieve a premium finish during filling |
Summary: if you want a repeatable premium result, stable geometry and easier installation, welded construction based on C-profiles with bolted cross connectors is a real advantage.
Configurations
How to match gabion fencing to your property
A sensible gabion fence thickness is usually within 20–40 cm and it’s worth choosing it in proportion to the space. Low (e.g. 120 cm) and very thick (e.g. 40 cm) fences can look heavy. On the other hand, very tall and narrow gabions are harder to fill neatly without voids — in that case, choosing the right infill matters most.
Options
Connection options for gabion fence systems
Below are the most common ways to connect panels and system elements. It makes it easier to match the fence to corners, gates, entrances or transitions to another fence type.
A universal thickness
For stone size 60–170 we most often recommend 25–30 cm. It makes neat filling easier and delivers a premium finish at any height.
Tall and narrow gabions
To avoid voids, choose an infill that “faces” well on the front: flat-laid slate or granite setts are common choices.
15 cm option (special)
Technically, a 15 cm thick fence (about 12 cm inside) is possible, but it requires a special 1×1 cm mesh and filling with a finer aggregate. This is for specific projects only.
For thicker fences, 60–210 stone is also acceptable. Quoting is fastest when you provide: section lengths, height and preferred thickness. If your site has slopes — add that information.
Use cases
Where does gabion fencing work best?
Gabion fences are chosen most often when you want privacy, stability and a strong visual effect without seasonal maintenance. Below are the most common scenarios where gabions work best in practice.
Homes & private properties
A solid barrier improves privacy. Stone and steel fit modern architecture and gardens well.
Busy roads
The mass of the infill acts as a barrier – improving acoustic comfort and reducing wind along the fence line.
Businesses & investments
Consistent look over long runs, repeatable geometry and high resistance to mechanical damage.
Sloped sites
With correct basket geometry and a good section plan, it’s easier to keep a neat stepped line and clean top edge.
Landscape features
Planters, low walls, posts and entrance accents – same technology, just a different visual form.
Front “premium” sections
When the front view matters: tidy infill pattern, straight top line and clean detail.
Durability
Gabion fence durability – what actually matters
In practice, durability depends on a few elements combined: steel protection, structural rigidity and correct installation. The stone mass won’t “fix” geometry mistakes — that’s why stiffeners and connections that keep wall spacing after filling are so important.
Corrosion protection
Steel is hot-dip galvanised to EN ISO 1461 (approx. 70 µm), and if needed, RAL powder coating is available. This is key for fences used for years without seasonal maintenance.
Rigidity & geometry after filling
The “straight wall” effect comes from: C-profiles, bolted cross connectors and wall spacing control. Thanks to this, the fence holds dimensions and the front stays flat even at higher heights.
If you want, we can match parameters to your project (height, thickness, infill, options). Fastest quote: send section lengths + height + info about site slopes.
Installation
Do gabion fences require foundations?
The answer is: it depends on height, soil and installation conditions. Low sections on stable ground can be installed on a well-prepared sub-base, but for greater heights and more demanding conditions, a foundation or a system solution is usually recommended to stabilise the fence line.
When a sub-base is enough
Stable soil, shorter sections, lower heights. Key is levelling and line control, so the basket doesn’t settle unevenly.
When we recommend a foundation
Higher fences, long runs, weaker/uncertain bearing capacity, slopes and critical points (corners, gates, entrances).
What proper preparation gives you
A straight line, faster installation and less risk of “waviness” after filling. This is often the cheapest stage, where saving costs you the most later.
Already have a design or sketch? Send a plan — we’ll match the solution to site conditions and propose a safe configuration.
Trust
Why Gablux?
Choosing gabion fencing is a long-term decision — that’s why we focus on repeatable build quality, predictable installation and refined structural details.
Manufacturing experience
We’ve been in the market for 14+ years and deliver projects in varied installation conditions.
Thousands of projects
4500+ completed projects — from small private properties to larger public investments.
Customer reviews
Average 4.9/5 Google rating — confirmed by real customer reviews.
Standard: welded construction, regular mesh, bolted cross connectors and a complete A2 fastener set. If you want to move fast — go to the quote section and we’ll match parameters to your dimensions.
Price
Gabion fence price – what’s included?
The price includes a complete set of ready-to-install components: baskets/panels, stabilising posts, post clamps, bracing, mounting plates and fasteners. Mounting holes are prepared during production, which makes installation easier and reduces the risk of damaging the zinc coating. The fence structure is based on gabion baskets , which provide rigidity, geometry control and durability for the whole system.
Included in the set
- gabion baskets / panels prepared for installation
- stabilising posts + clamps
- bolted cross connectors (internal connections)
- fasteners (A2 stainless)
- hot-dip galvanising EN ISO 1461 (~70 µm)
Optional add-ons
- powder coating in any RAL colour
- top covers (2 options) – top closure
- stone selection + recommended grading
- design for slopes and corners
Standard clamp vs MAX
Standard is designed to be sufficient for typical Gablux applications. MAX has a different build, which translates into noticeably improved rigidity — mainly in unusual projects (very large heights, suspended structures). In practice, MAX can be an add-on that slightly simplifies installation.
Top covers – 2 options
Two versions are available: standard cover (without gabion-like openings) and a reinforced cover, which provides openings similar in size to the gabion mesh. The choice depends on the project and the desired visual effect.
Infill
What stone and what grading for gabion fencing?
Common choices include river stones, granite, basalt, sandstone or slate. The key is grading matched to the mesh, because that determines compactness and a flat front face. For 5×20 gabion fencing we most often recommend 60–170. For thicker fences, 60–210 is also acceptable.
Visual effect
Light and grey stones give a clean, modern look. Dark stone emphasises contrast and a premium finish.
No voids
For tall and narrow gabions, consider flat-laid slate or granite setts so the front stays even.
Noise reduction
The mass of the infill works as a natural sound barrier, improving comfort near busy roads.
Guides
Guides & projects – gabion fencing from A to Z
If you want to plan your gabion fence properly (without costly fixes), start here. These materials cover the most common questions: design, site prep, foundations, installation and typical mistakes.
How to plan a gabion fence – from design to installation
Key decisions before a quote: height, thickness, sections, corners and site slopes.
How to install a gabion fence – step by step
Practical installation flow: posts, bolting baskets, geometry control and filling.
How to prepare the ground for a gabion fence
What makes the fence straight: levelling, sub-base, drainage and section planning.
Do gabion fences need foundations?
When a stable sub-base is enough and when a foundation is necessary — depending on height and soil conditions.
Gabion fence on a slope – how to do it correctly
Stepped sections, corners and a clean top line — the most reliable approach on slopes.
Common installation mistakes – and how to avoid them
What ruins a premium finish: wall spacing, connector tightening, filling method and lack of geometry control.
Gabion fence cost – price list and quote examples
What truly affects cost: height, thickness, infill type, sections and optional add-ons (e.g. RAL).
Want a quote for gabion fencing?
Send section lengths and height (or a fence plan). We’ll match the parameters, thickness and infill (e.g. 60–170, or 60–210 for thicker constructions) and prepare a tailored quote.
The quote is free and non-binding. If your site has slopes — mention it and we’ll propose corner and transition solutions.
FAQ